Product introduction
The welding system applies IGBT inverter technolog and DSP control technology,and have the capacity carrying 5 welding can be achieved, when the system docks with robots under auto-feeding.
Max.welding current can reach 2000A.
TECHNICAL DATA
A. Circuit topology: Full Wave Bridge Rectification
B. Current control technology: Constant Current PWM or Pulse
C. Power switch: IGBT
D. Power Transformer: Ferrite Dual Transformer
E. Interface monitoring: optoelectronic isolation
F. System Control: DSP+FPGA+CPLD
G. User interface: Touch Screen
H. Language: Chinese/English
I. Network Topology: Real-time half-DUPLEX RS 485, Ethernet, CAN, USB
J. Hardware Anti-interference: isolated power supply
K. Software Anti-interference: Distributed Watchdog,
error return and check, hiccup reset
L. Monitoring system: real-time working condition and fault detection
M.Quality assurance: monitoring and optimization of welding quality
OVERALL TECHNICAL DATA
Input voltage
|
3×380V, 50/60Hz
|
Max.KVA ransge
|
In:100~2000A
|
IPArc initiation current
|
20~100A
|
TWWelding time
|
6~100ms
|
IPArc initiation time
|
10~100ms
|
△I
|
△I:10A
|
Input voltage tolerance
|
380VAC±10%
|
Max.KVA ransge
|
120KVA
|
Welding rate
|
n: 30~60 (I=1500A, t=30ms)
|
Welding stud Range
|
Φ:3~12mm
|
Stud fixing time
|
50~2000ms
|
Feeding time
|
50~2000ms
|
Lag time
|
50~500ms
|
Stud falling time
|
0~50ms
|
Supporting capacity
|
5 gun interface, pne/more
RS232 interfaces, Ethernet,
optical fiber and CAN.
|