-
The High frequency inverter DC welding machine is our company to develop and produce new kind of resistance welding machine. The device is the most advanced high-frequency, full-bridge soft switching inverter technology technology and DSP digital control technology, output frequency of 10,000 Hz. Transformer welding forming of small size, high output power, well, less spatter, high control precision. When welding multi-layer of galvanized steel and high strength steel,not only the solder quality, and we can do the basic emission-free. The product won four national invention patents, fifteen utility model patents and three software copyright certificate and another two international patents under patent review of the designated State.
-
The device has the following characteristics:
-
1. transformers are small, light weight, not only to achieve the integration of transformer and electrode holder, and also help reduce the overall weight of robot welding clamp.
-
2. hollow motor gun retract servo linear actuator can be imported, can also takethe company independent research and development and a number of patented linearactuator. The hollow motor adopts imported roller screws, its service life is 5-10 times the ordinary ball screw. Iproduced the electric cylinder structuredesign, low noise, strong rigidity, long service life, easy maintenance.
-
3. won a number of design patents of robot welding clamp body, procurement ofaviation aluminum processing, good rigidity and high strength, deformation issmall, to improve the weld quality, and played a positive role as a safeguard.
-
4. welding and robot communications hosts using the DEVICENET Protocol, also according to user requirements, configure a personalized communication module.
-
As national Twelve-Five major special "based on robot of car welding loaded Automation line" project of bear who one, times HF electric Servo Robot dedicated DC spot machine has was Faw sedan company of D009 models of floor line, and M3 models of main welding line, variety models used; the equipment also Yu 2013 success bid Shanghai General car D2UX platform robot spot machine project, dozens of inverse changed DC robot dedicated electric servo spot machine, specifically for the project of high strength plate welding.
C型机器人专用电动伺服焊钳
C Type-Robotic Spot Welder
X型机器人专用电动焊钳
X Type-Robotic Spot Welder
主要参数表(TECHNICAL DATA):
|
型号Type
|
参数 Parameters
|
DB6-40Z
|
DB6-63Z
|
DB6-100Z
|
额定输入功率 Rared input power
|
40KVA
|
63KVA
|
100KVA
|
额定输入电源电压 Rated Input voltage
|
三相380V±10%
|
三相380V±10%
|
三相380V±10%
|
安全保护电流 Safety protective current
|
30mA
|
介电强度 Dielectric strength
|
4000V,60s(初---次级)
|
最大短路电流Max.short-circuit current
|
12000A
|
15000A
|
18000A
|
焊接范围 welding range
|
0.5+0.5—2.5+2.5mm
|
0.5+0.5—3.5+3.5mm
|
0.5+0.5—3.5+3.5mm
|
焊接速度 welding rage
|
10-30点/分钟
|
10-30点/分钟
|
10-30点/分钟
|
空载电压 Max.welding voltage
|
DC8.5V
|
DC8.5V
|
DC10.8V
|
焊接时间范围 weld time
|
5---500ms
|
额定负载持续率 Rated duty cycle
|
20%
|
绝缘等级 insulation class
|
F级(155℃)
|
防护等级 Class protection
|
IP54
|
环境温度 Working temperature
|
5---40℃
|
电动缸压力 Electric cylinder pressure
|
0---7000N
|
水路压力 Water pressure
|
0.3Mpa
|
冷却水流量 Cooling water flux
|
10L/min
|
12L/min
|
14L/min
|
控制箱体积 Pedestal volume
|
长480宽256高559
|
焊钳重量 Welding clamp weight
|
60-90KG
|
65-100KG
|
70-120KG
|
控制箱重量 Pedestal weight
|
30KG
|